Introduction of Air to Air Heat Exchanger
Air to Air Heat Exchanger, efficient equipment to heat your pool. Having your swimming pool for bathing any day of the year is a job that requires a lot of planning, whether with cleaning and maintaining the required levels of substances in the water or because of its temperature.
Enjoying a swimming pool in winter is less common than in summer, but even so, some do not give up relaxing and enjoying underwater. This is easy to do with electric resistance heaters or gas, but technology has proven to be more and more efficient and cheaper for this purpose: the heat exchanger.
WHAT IS THE HEAT EXCHANGER?
A heat exchanger is a device that removes heat from the air and transfers it to water, causing its temperature to gradually increase. This product is easy to make in two ways:
- with tubes inside tubes through which the water passes and comes into contact with the gas tube.
- with heat exchange taking place; or even with a tank,
Through which passes a hose containing a gas that exchanges heat with water. In other words: it takes the ambient temperature and transfers it to water. Anyone who wants this practicality, especially in winter, will need to heat the water.
What are the benefits of Keyword: Air to Air Heat Exchanger?
In short: efficiency and price of Keyword: Air to Air Heat Exchanger is something very important. Whoever chooses a heat exchanger for their pool will realize how well-regulated equipment can be efficient in maintaining the water temperature. When buying your own, give preference to equipment with a timer, which works at certain times, preventing.
for example, it from working at dawn, when the use of the pool is less common and the room temperature tends to drop a lot. Furthermore, this causes the product to use more energy to keep the pool warm. Hours between 8 am and 6 pm are highly recommended. As a result, you may also notice a long-term drop in price.
Cost comparison of heating systems
- The ratio of 1°C x 1000 liters of water
- SYSTEM R$
- 30,000 BTU Heat Pump BRL 0.20
- Gas BRL 1.00
- 1000W resistance BRL 1.50
- Solar BRL 0.00
Note: it is necessary to consider that, in any system, there will be greater intensity. In addition, consumption is valid until the chosen temperature is reached, later on, consumption will drop as it will be for maintenance. On average, a pool with a thermal cover loses 1 to 2 degrees at night.
The useful life of Air to Air Heat Exchanger
The useful life of heat exchangers is also much longer than that of other heaters, making it much more economical equipment that ends up paying for itself over the months. A great alternative to keep the water in your pool warmer.
Another aspect to be highlighted is that the heat exchanger compressor is automatically turned off when the water reaches the desired temperature. Depending on the programming, it is possible to make the appliance restart every hour, to make a water test and verify the need to heat the water more.
How to install Keyword: Air to Air Heat Exchanger?
To install a heat exchanger, the engine room in your home must be good to receive the necessary installations for heating, such as the motor pump, filter, and hydraulic piping. One of these requirements, for example, is that the device's installation surface is completely flat, preventing internal processes from being compromised in terms of efficiency.
In addition, it is necessary to place the Air to Air Heat Exchanger in an easily accessible place. It's also important to leave the panel oriented in a clear area, so you can turn on and configure the device without any problems. You can use other modern tools to maintain this device easily.
Beware of Air to Air Heat Exchanger size
The size of the heat exchanger will also depend on the size of the pool but also on the location where the pool installs. The length, width, and depth have an impact on the size, but a swimming pool in the South region. Moreover, it is cooler, will need adequate and more powerful equipment than a heat exchanger in the Northeast region.
We've said it here on the blog before and we'll say it again: even if everyone on an oil platform has their duties, knowing how all the processes work is fundamental. In addition to being aware of everything that goes on around you, you can help avoid problems! In this post, let's talk about Heat Exchangers and their role in an Offshore platform!
What are heat exchangers and how to use them?
Heat exchangers are equipment that performs the heat exchange process between hot fluids and cold fluids. This exchange is easy to do between separate systems or by mixing fluids. Heat exchangers are widely common in various industry sectors such as Offshore Oil Rigs, Power Generation Plants.
Chemical Plants, Oil Refineries, Natural Gas Processing, and Wastewater Treatment. In the oil industry, heat exchangers are common to breaking down emulsions between oil and water, cooling gases coming from the compression process, and in condensing and heating the mixture in a distillation tower, for example.
How Important are Offshore Parts Cleaning?
As it is expensive and difficult equipment to be produced, the resale of heat exchangers is a very common practice since, after cleaning and inspection, the equipment can be common. We've said it here on the blog before and we'll say it again.
even if everyone on an oil platform has their duties, knowing how all the processes work is fundamental. In addition to being aware of everything that goes on around you, you can help avoid problems! In this post, let's talk about Heat Exchangers and their role in an Offshore platform.
Conclusion
To begin with, it is necessary to understand Air to Air Heat Exchanger that work with the production and extraction of oil and gas.
