Introduction of Heat Exchanger Furnace
The Heat Exchanger Furnace maintenance is important for all systems using equipment that control the heating and cooling. The exchanger is essential for balancing the temperature in industrial equipment, swimming pools, refrigerators, and other installations.
Its role is important to prevent overheating, which causes system failures, impairs the operation of equipment, and can even cause accidents. In cases of swimming pools, the ideal is to make a correct choice when purchasing a good quality product, that is, one that offers good performance.
Proper and timely maintenance.
In addition, the installation must be done by a technician, to ensure that all equipment will be working perfectly, to maintain constant fluid exchange, ensuring cleanliness and the programmed temperature in the pool. However, it is possible that, during use, it may be necessary to call a Heat Exchanger Furnace maintenance specialist to carry out repairs and repairs.
The heat pump needs care and cleaning, so its performance will be efficient and you will have a pool heated at a pleasant temperature. Over time, the pump may have one of its parts worn out, requiring replacement. Identifying this wear before the exchanger stops working is possible through preventive maintenance.
Schedule cleaning is important in Heat Exchanger Furnace
Dirt can also affect the work of the heat pump, so it is necessary to schedule a cleaning of the system. Therefore, we can say that heat exchanger maintenance must be periodic, to keep the entire system in perfect working order.
You should also look for Heat Exchanger Furnace maintenance when you feel the system is faulty. Irregular pool temperature may indicate that the pump is not working properly. This shows that the heat exchange is not going as it should, indicating a fault that needs to be checked.
Heat Exchanger Furnace pump maintenance is required
Pump noise also indicates problems and a technician should investigate the cause to ensure the heat exchanger does not fail and compromise heating. You should also call a heat exchanger maintenance company when you notice the pump has stopped working.
In these cases, the technician can indicate the replacement of the equipment. Always keep in touch with a pump maintenance company to ensure preventive technical visits and carry out repairs whenever necessary. Ideally, your heat pump works perfectly to ensure swimming pools with a pleasant temperature.
How to work heat exchanger tube?
The Heat Exchanger Furnace system is one of the most common devices in condominiums. Because this equipment takes up little space and is more efficient, it can heat water much faster. Mainly where the pool is shared, so it is common daily on cold days, or even at night, thus needing heating.
The heat exchanger works only with electricity to heat the water. Once the water is heated through a circulation system, pressurized by a pump. The pool's cold water passes through the heat exchanger tube. In which the outer tube that receives heat from the equipment, transmits this heat to the inner tube then transmits heat to the water.
How to control a system with sensors?
As long as the pool does not reach the desired temperature, the water continues to circulate and exchange heat. To have the exact temperature control that the user wants, an electronic system integrated into the set of sensors is common, which captures water temperature information and sends it to the controller.
In the middle of the differential, the controller must have a comfortable temperature setpoint for the pool so that the Heat Exchanger Furnace does not exceed this temperature, leaving it too high or too low. In this way, the Heat Exchanger works only to maintain the water temperature or heat up even more.
Heat exchanger for pool heating
For perfect operation, the heat exchanger pump must be installed in a suitable place. However, the equipment must be free of elements that could obstruct the airflow in the environment. It should be installed away from walls and spaces with poor ventilation. The equipment can also be exposed to the action of the sun and rain.
- The exchanger must be installed on a flat base, helping the system to be more efficient.
- Hydraulic installation.
- Heat Exchanger Furnacefor pool heating. Request a Quote.
- Heat exchanger for pool heating
- Therefore, the need to use a check valve.
Necessary elements for Heat Exchanger Furnace
Although this check valve is only necessary when the water inlet of the equipment is below the level of the pool. With the pool's filtering system independent of the pumping of the heating system. If the exchanger is installed more than 5 meters away from the pool, exposed to the environment instead of cold temperature.
It is necessary to carry out thermal insulation of the pipes to avoid heat loss in water displacement. It is also necessary to use thermal covers in the pool, to help improve the system's efficiency and save energy and maintain temperature, minimizing heat exchanges with the external environment.
Where the heat exchange with pool water takes place.
- Heat exchanger for pool heating. Request a Quote.
- Heat exchanger for pool heating.
The Heat Exchanger Furnace is a piece made of metal, consisting of two tubes. As soon as these tubes are one inside the other, through which one passes the pool water and the other the refrigerant fluid (gas).
How much does a heat exchanger cost?
Do you want to heat your pool and don't know the value of the heat exchanger equipment? Find out now on our blog. Pool temperatures never remain in ideal conditions for use all year round, even in regions with the hottest climate in Brazil. In regions of Brazil where the climate is colder. Therefore, they work perfectly at temperatures above 10°C.
you can enjoy the pool at a pleasant temperature for just 2 or 3 months throughout the year. Regardless of which region of the country you live in, the most economical way to keep your pool water temperature pleasant is to install a pool Heat Exchanger Furnace. This type of pool heater heats the water by capturing the heat from the environment.
Electric Heat Exchanger Considerations and Costs
Here are some considerations that should be taken into consideration when choosing the ideal heat exchanger to heat your pool. Length, Width, and Depth of the pool: the pool volume must be considered
- Type of use: Residential or Commercial (clubs, gyms, hotels)
- Period of use: Only on weekends, as is the case with most residential pools, or all week, such as commercial pools.
- Type of construction: Open or Closed
How to calculate the size of a heat exchanger?
The design of a pool heat exchanger is based on some variables that can change the power of the equipment. These variables are input into spreadsheets or applications that automatically calculate the ideal Heat Exchanger Furnace for your pool.
Desired final temperature: This temperature may vary depending on the type of use of the pool. Club and gym pools use temperatures of around 28°C, residential pools around 31°C, and therapeutic pools can reach up to 34°C.
Conclusion
The larger the pool area, the greater the heat exchange surface with the environment. We can say that the more the pool water can lose heat to the external environment. That is why it is so important to use a thermal cover so that this lost heat is minimized.
This information is very important because, as our country is very large, we have different climates in each region of the country.
